ELECTROLUBE TFCF – Zaščitno sredstvo na osnovi fluorovih polimerov

Trenutno se nahajate: proizvodi> Kemično - tehnični proizvodi> Elektro-kemikalije> Zaščitni laki> ELECTROLUBE TFCF – Zaščitno sredstvo na osnovi fluorovih polimerov

Izberi izdelekConformal Coating - which application suites best?DOWSIL 1-2577 Conformal CoatingDOWSIL 1-2577 Low VocDOWSIL 1-2620 DispersionDOWSIL 1-2620 Low VOC Conformal CoatingDOWSIL 1-4105 Conformal CoatingDOWSIL 3-1944 RTV CoatingDOWSIL 3-1953 Conformal CoatingDOWSIL 3-1965 Conformal CoatingDOWSIL 3140 RTV CoatingDOWSIL CC-3122 Conformal CoatingDOWSIL CC-4555 Long Bath Life Conformal CoatingDOWSIL CC-8030 UV and Moisture Dual Cure Conformal CoatingDOWSIL HC 1000 Gray Conformal CoatingDOWSIL HC 1100DOWSIL HC 2000 Conformal CoatingDOWSIL HC 2100 Conformal CoatingDOWSIL HC 2100 Conformal CoatingDOWSIL Q1-4010 Conformal CoatingDOWSIL SE 9157 Conformal CoatingDOWSIL SE 9186 L SealantDOWSIL SE 9187 L Adhesive Black, Clear (Translucent), or WhiteDOWSIL SE 9189 L RTVELECTROLUBE 2K300 Two-Part CoatingELECTROLUBE 2K350 TWO-PART COATINGELECTROLUBE 2K500 Dvo-komponenten PremazELECTROLUBE 2K550 Two-Part CoatingELECTROLUBE 2K850 UV Cure Two-Part CoatingELECTROLUBE 2KPB Conformal Coating Reaction AgentELECTROLUBE AFA - Aromatic-Free Acrylic CoatingELECTROLUBE APL – Akrilni zaščitni lakELECTROLUBE CPL – Prozoren zaščitni lakELECTROLUBE DCA - SCC3 Zaščitni lakELECTROLUBE DCA-FD - Hitro sušeč DCAELECTROLUBE DCB - Modified Silicone CoatingELECTROLUBE DCR – SCC3 Conformal CoatingELECTROLUBE DCRT – High Build DCRELECTROLUBE DCT – Redčilo za neakrilne lakeELECTROLUBE FPC Fluorinated Polymer CoatingELECTROLUBE HFS High Performance Fluorinated SolventELECTROLUBE HPA – Visoko zmogljiv akrilni zaščitni lakELECTROLUBE LFCC – Zaščitni lak za Lead Free platineELECTROLUBE PCM – Zaščitna maskaELECTROLUBE PCS – Sintetična zaščitna maskaELECTROLUBE PTH – Redčilo za poliuretanske zaščitne lakeELECTROLUBE PUC – Poliuretanski zaščitni lakELECTROLUBE TFA - Akrilni zaščitni lak brez ToluenaELECTROLUBE TFCF – Zaščitno sredstvo na osnovi fluorovih polimerovELECTROLUBE UAT – Univerzalno redčilo za akrilne zašitne lakeELECTROLUBE URC High Performance Urethane CoatingELECTROLUBE UVCL - UV sušeč zaščitni lakSYLGARD 1-4128 Conformal Coating Kit

EN AT DE CZ HU SI SK HR 

Electrolube

ELECTROLUBE TFCF – ZAŠČITNO SREDSTVO NA OSNOVI FLUOROVIH POLIMEROV

Pošlji povpraševanje za ta izdelek!

TFCF is a unique, fluoro polymer coating formulated to provide high levels of liquid repellency to printed circuit boards and other electronic devices. Once dried, TFCF forms a thin transparent film of very low surface energy. The low film strength allows assemblies to be coated without masking. As TFCF is mechanically weak, it is easily removed by minimal friction, therefore eliminating the requirement for masking components such as switches, piezo speaker devices and contacts prior to coating.

Features

• Excellent adhesion on a wide variety of substrates. 
• Fast & cost effective coating procedure 
• Good operating temperature range & resistance to humidity. 
• Contains a UV trace to allow for easy inspection 
• Can be soldered through without fear of highly toxic gases being produced (contains no isocyanates). 
• Non-corrosive to Cadmium and Zinc plate (contains no phenols). 
• Resistant to mould growth. 
• Free surface energy lower than that of PTFE or polyethylene

Pdf:

• TDS ELECTROLUBE TFCF Fluorocoat Surface Modifier eng.pdf