ELECTROLUBE TPM350

Trenutno se nahajate: proizvodi> Kemično - tehnični proizvodi> Elektro-kemikalije> Proizvodi za odvajanje toplote> ELECTROLUBE TPM350

Izberi izdelekDIATHERM Toplotno prevodni trakoviDOWSIL TC-3065 Thermal GelDOWSIL TC-4040 Dispensable Thermal PadDOWSIL TC-4515 Thermally Conductive Gap FillerDOWSIL TC-4525 Thermally Conductive Gap FillerDOWSIL TC-4535 CV Thermally Conductive Gap FillerDOWSIL TC-5150 Thermally Conductive Gap FillerDOWSIL TC-5550 Thermal Conductive Compound DOWSIL TC-6010 Thermally Conductive EncapsulantELECTROLUBE ER2074 – Toplotno prevodna epoksidna smolaELECTROLUBE ER2183 – Epoksidna toplotno prevodna smolaELECTROLUBE HTC – Brezsilikonska toplotno prevodna pastaELECTROLUBE HTCP – Brezsilikonska toplotno prevodna pasta PlusELECTROLUBE HTCPX - Brezsilikonska toplotno prevodna pasta Plus XtraELECTROLUBE HTCPX LV – Brezsilikonska nizkoviskozna toplotno prevodna pasta Plus XtraELECTROLUBE HTCX – Brezsilikonska toplotno prevodna pasta XtraELECTROLUBE HTS – Silikonska toplotno prevodna pastaELECTROLUBE HTSP – Silikonska toplotno prevodna pasta PlusELECTROLUBE TCOR – Toplotno prevoden silikonELECTROLUBE TPM350Materiali za odvajanje toplote

EN SI 

Electrolube

ELECTROLUBE TPM350

Pošlji povpraševanje za ta izdelek!

Electrolube TPM 350 is one of Electrolube's latest high-performance product innovations in our thermal interface material range.

It is designed for easy application via screen printing, containing a small amount of solvent which evaporates after application to leave a cured material in place. This eliminates the mess associated with thermal pastes or greases. The material changes viscosity (phase change) once it reaches its activation temperature of 50°C ensuring efficient thermal transfer during operating conditions, minimizing contact thermal resistance, and returning to its cured state once it cools down again.

This phase change allows for a vast array of application scenarios while it also has an exceptional thermal conductivity value of 3.5 W/m.K.

With thermal interface materials, every application is different and one should not rely solely on the TDS to compare products. If you have any concerns or questions, please don't hesitate to get in touch with our technical support team.

Key Properties:

• Phase Change Material - changes state at 50°C 
• High-Performance 
• High Thermal conductivity 3.5W/m.K. 
• Screen printable 
• Contains solvent, excellent wet ability 
• RoHS-2 Compliant

Pdf:

• TDS ELECTROLUBE TPM350 eng.pdf