- Trenutno se nahajate: novice> Novosti> PERMABOND 2K MT382 | New
New UV anaerobic adhesive from PANACOL
Panacol has developed Vitralit® UD 4292 F, a new dual-curing adhesive that cures primarily by UV light with a secondary anerobic cure for shadowed areas. The special feature of this adhesive system is the high glass transition range of >130°C when cured under optimum conditions.In response to a growing market demand for UV anerobic adhesive systems, Panacol has expanded its portfolio of dual-curing adhesive systems with Vitralit® UD 4292 F. This new product is ideally suited ...
Obvestilo o spremembi naslova podjetja
Spoštovani,želimo vas obvestiti o novem naslovu / sedežu podjetja. Novi naslov se glasi:ULBRICH HIDROAVTOMATIKA d.o.o.Obrtniška ulica 8SI-2360 Radlje ob DraviHvala za razumevanje!Kolektiv podjetja ULBRICH Hidroavtomatika d.o.o.
PERMABOND 825 | New
PERMABOND 825 is a low viscosity modified ethyl cyanoacrylate suitable for applicationswhere high temperature resistance is required. This material is fast setting and has goodadhesion to rubber, metal and plastics. Permabond® 825 has excellent retention ofstrength during thermal ageing and it is resistant totemperatures of up to 200°C, without the needfor a secondary heat cure. This makes it anideal choice for high speed productionlines, bonding components that needto ...
Smart system solution for needle bonding
A main field of application for adhesives in medical systems is needlebonding and syringe assembly – the bonding of stainless steel needles orcannulas into glass or plastic syringes. These needles are produced in largequantities which requires rapid and reliable bonding in high volumeproduction. In addition to their mechanical bond strength, the adhesives usedmust allow high-precision production and permanent joining and mustwithstand various sterilization ...
DOWSIL CC-8030 UV and Moisture Dual Cure Conformal Coating | New
DOWSIL CC-8030 is a one-part, translucent, Medium Viscosity, UV and Moisture Dual Curable Coating. Features & BenefitsNo added solvents BTX solventless Low viscosity, sprayable Fast primary UV cure Secondary moisture cure for shadowed areas Non-oxygen inhibited formulation Elastomeric formulation improves reliability against stress Low modulus for delicate components UV indicator allows for easy or automated inspection UL 746E UL-94 ...
DOWSIL TC-3065 Thermal Gel | New
DOWSIL TC-3065 is a one-part, 6.5W/mk thermal conductivity silicone gel. It’s printable or dispensable to cure as a soft thermal gel to replace fabricated thermal pads for thermal transferring, stress relieving and shock damping. Room temperature curing, or accelerated curing at 60°C or higher temperature for shorter curing time.Features & BenefitsOne-part, gray, dispensable and curable thermal gel Re-workable after curing Room temperature curing or accelerated at 60°C or ...
DOWSIL TC-4040 Dispensable Thermal Pad | New
DOWSIL TC-4040 is a two-part, 1-to-1 mix ratio, blue color, thermally conductive dispensable thermal pad. It’s printable or dispensable to cure as a soft thermal gel to replace fabricated thermal pad for thermal transferring, stress relieving and shock damping. It could also be used as gap filler with reworkable performance. Features & BenefitsLiquid and curable thermal gel to form a soft thermal pad to help gap filling, heatdissipating, stress relieving and shock ...
PANACOL Vitralit UD 8052 F | New
Vitralit® UD 8052 F is a one component, no flow, UV/visible light and humidity curing isocyanate acrylateadhesive. The base material is transparent and slightly yellow. Customized versions with various colorsare possible and make process control easier. Vitralit® UD 8052 F is specially designed as a flexible encapsulant for local circuit board protection. Itsjetting dispensability and fast cure properties make it especially suitable for applications in consumerelectronics, where ...
PERMABOND 2K ET5364 | New
PERMABOND® ET5364 is a two-part, 1:1 mixableepoxy adhesive with good adhesion to a variety ofsubstrates such as wood, metal, ceramics and someplastics and composites. Permabond ET5364 formstough bonds with excellent shear strength. Features & Benefits Adhesion to a wide variety of substrates Easy to apply High shear strength Good impact strength Good chemical resistance Non-drip rheology Permabond is responding to customers’ ...
PERMABOND 2K MT382 | New
PERMABOND® MT382 is a two-part, modified epoxy adhesivedesigned for sealing/bonding and potting applications. Ithas excellent adhesion to Nylon, ABS, Polycarbonate andother plastics as well as a variety of different metals. Theproduct can be cured in different mix ratios depending onthe flexibility required in the final cured product. MT382 isself-levelling. Features & Benefits Adhesion to a wide variety of substrates Full cure at room ...
