PERMABOND UV6302 is a UV‐curing adhesive
developed for use on plastics. It has superb
adhesion to acrylic and contains a longwavelength
photo initiator to allow it to cure
through UV‐stabilised plastics. This adhesive
can also be used to bond glass, metals and other
materials. It cures to give a colourless bond
so is ideal for applications where aesthetic
appearance is vitally important.
PERMABOND UV6302 has very low viscosity for good capillary action; this makes it ideal for close fitting components with tight gaps and for post assembly application.
Features & Benefits- Cure on demand
- High shear strength
- Fast curing with low‐power lamps
- 100% solids, no solvents
- Excellent adhesion to plastics
- Capillary action
PropertiesShear strength (PC/PC): >7 N/mm²
Tensile strength: 15-20 N/mm²
Elongation: 100 - 150%
Hardness: 50 - 65 Shore D
Viscosity: 50 ‐ 100 mPa.s
Fixture time: in seconds (depending on intensitiy of UV light and layer thickness)
Maximum gap fill: 0.2 mm
Appearance: Clear, colourless
Refractive index: 1,474