ULBRICH Universal in-line coil spring test- and setting machine 500kN

Trenutno se nahajate: proizvodi> Stroji, naprave, industrijska hidravlika> Stroji in naprave s hidravličnim pogonom in elektronskim krmiljenjem> ULBRICH Universal in-line coil spring test- and setting machine 500kN

Izberi izdelek ULBRICH Naročniško namenski stroji in napraveULBRICH Air spring test machineULBRICH Assembly press with rotary table (inside)ULBRICH Assembly press with rotary table (outside)ULBRICH Autofrettage systemULBRICH Bolt Assembly PressULBRICH Buffer test machineULBRICH C Inteligentne stiskalnice za montažo in kontroloULBRICH Chockblock testing machineULBRICH Clutch Test MachineULBRICH Column pressULBRICH Combination shock absorber and spring test machineULBRICH Edge force measuring and lifting equipmentULBRICH Hydraulic pressULBRICH Lift and turning systemULBRICH Naprava za Preizkušanje VzmetiULBRICH Press stationULBRICH Production cell for tapered roller bearingsULBRICH Production pressesULBRICH Shock absorber test machineULBRICH Universal in-line coil spring test- and setting machine 500kNULBRICH Wave Straightening PressULBRICH Wheel pullerULBRICH Wheelset bearing housing pressULBRICH Wire rope test machineULBRICH Workshop presses

EN AT DE CZ HU SI SK HR 

ULBRICH UNIVERSAL IN-LINE COIL SPRING TEST- AND SETTING MACHINE 500KN

Pošlji povpraševanje za ta izdelek!

The test machine is designed to measure a variety of different spring sizes from a diamter of 80mm - 500mm and lengths from 150mm to 900mm. The measurement can be carried out immediately after the manufacturing process is completed, and if required can also be integrated into setting processes.  The machine guides the springs automatically and the measurement of the spring is carried out following a pre-programmed cycle. The individual springs will then be sorted according to wheter the test paramenters were met or failed, these can be sorted accordingly. The test cycle of the machine can be synchronised to the production output of the spring manufacturing process in order to maximise efficiency.

Video: