Cor-Ban 50 is a dark brown, thixotropic liquid CIC intended for heavy duty use. The Cor-Ban 50 is a solvent cut-back formulation which dries in approximately two hours. This is a firm, amber, transparent film which will not flow below 175° F.
Application:
Cor-Ban 50 is formulated to protect painted and unpainted metal surfaces. Cor-Ban 50 may be applied by spray, dip or brush in the temperature range of 50° F to 100° F. A gallon of this material will cover approximately 800 square feet at a film thickness of 1mil thick. For areas requiring penetration, pretreat areas with Cor-Ban 35 then cover with Cor-Ban 50. One aerosol of Cor-Ban 50 covers approximately 95 ft 2.
Features:
Cor-Ban 50 is non-corrosive and readily wets the surfaces of most commonly used metals.
Physical Properties:
- Non-Volatile Content % 55
- Flash Point, PMCC,° F 110° F (44° C)
- Salt Spray, on steel >700 hrs
- Viscosity 400cps
- Low Temperature Adhesion No Flaking
- Removable with solvent
- Compatability with Brass, Cadmium, Zinc, Magnesium, Aluminum, Steel
- Humidity Cabinet Hours >1000 hrs
Obrni barve
Svetli kontrast
Temen kontrast
Podčrtane povezave
Povečaj besedilo
Ustavi animacije
Višja vrstica
Berljiva pisava
Skrij slike
Kazalec
Ponastavi vse