D-5440NS Fluorocarbon Dry Lubricant is a fluorocarbon telomer chemically similar to Teflon* PTFE-fluorocarbon resin. Due to its chemical inertness and ability to withstand temperatures from the cryogenic range up to 500° Fahrenheit (260° C.), this fluorocarbon finds many uses not offered by other materials.
Application:
Zip-Chem D-5440NS fluorocarbon in aerosol form is designed primarily for use as a dry film lubricant or mold release where the application is to a cold or warm surface (less than 300° F.). It is formulated to give the highest adhesion possible to the substrate and still give good release or lubricating properties.
Features:
Excellent anti-stick properties. Effective release agent for epoxies, polyurethanes, etc. Withstands temperatures up to 500° F. (260° C.) Continuously. Will not run or stain Excellent dry film lubricant for wood, plastic, rubber, paper and metal. Non-conductive, chemically inert in use. Although Zip-Chem D-5440NS is capable of withstanding up to 500° F., the binding resin of the product will start to decompose at 240° F. This product may safely be used up to 500° F. Provided the vapors are not inhaled, and adequate ventilation is provided. Teflon is a Registered Trademark of E.I. Dupont Co.
Physical Properties:- Viscosity: 25-50 CPS
- Density: 6.6 lbs/gal
- Softening Point: 510° F. (265°>C.)
- Melting Point: 572° F. (300° C.)
- Toxicity: Avoid inhaling vapors at high temps
Obrni barve
Svetli kontrast
Temen kontrast
Podčrtane povezave
Povečaj besedilo
Ustavi animacije
Višja vrstica
Berljiva pisava
Skrij slike
Kazalec
Ponastavi vse