International
Smole za zalivanje nudijo zaščito ter izolacijo tiskanih vezij (PCB), električnih in elektronskih komponent pred agresivnimi vplivi ter zagotavljajo zanesljivo delovanje tudi v zahtevnih pogojih ...
DOWSIL EI-2888 Primerless Clear Silicone Encapsulant is an patented innovative solution that will help you in addressing the processing and cost challenges by providing good primerless adhesion, ...
DOWSIL™ 3-4118 Gel Two-part, soft, clear gel, 1:1 mix ratio, high viscosity to limit flowout. Features & Benefits Clear gel High viscosity Room temperature cure that ...
DOWSIL™ 3-4133 Dielectric Gel Kit Two-part, clear, 1:1 mix ratio gel Features & Benefits Clear Fast heat cure Long working time and low viscosity aid process ...
DOWSIL™ 3-4150 Dielectric Gel Kit Two-part, transparent green, fast RT or heat cure. Features &Benefits Fast room temperature cure Two parts are blue and yellow and ...
DOWSIL™ 3-4150 Dielectric Gel Kit Two-part, transparent green, fast RT or heat cure. Features & Benefits Fast room temperature cure Two parts are blue and yellow and ...
DOWSIL™ 3-4154 Dielectric Gel Kit Two-part, clear, RT or heat cure. Features & Benefits Clear Fast heat cure Fast heat cure for increased processing ...
DOWSIL™ 3-4155 HV Dielectric Gel Kit Two-part, transparent green, fast RT or heat cure, UV indicator, high viscosity, and low temperature (-80°C/112°F) stability. Features & ...
DOWSIL™ 3-4170 Dielectric Gel Kit Two-part, clear, heat cure, long working time. Features & Benefits Clear Fast heat cure Long working time and low ...
DOWSIL™ 3-4207 Dielectric Tough Gel Two-part, translucent green, 1:1 mix ratio, fast room temperature cure tough gel with UVindicator, conditional primerless adhesion and good flame ...
DOWSIL™ 3-4222 Dielectric Firm Gel Kit Two-part, translucent green, firm, fast RT or heat cure, and primerless chemical adhesion. Features & Benefits Fast room ...
DOWSIL™ 3-4241 Dielectric Tough Gel Kit Two-part, translucent green, RT or heat cure, UV indicator, long working time, tough primerless chemical adhesion, UL 94 V-1 flammability ...
DOWSIL™ 3-4680 Silicone Gel Kit Two-part, transparent blue, fast RT or heat cure, low viscosity. Features & Benefits Fast room temperature cure Transparent ...
DOWSIL™ 3-6121 Low Temperature Elastomer Two-part, clear, low temperature performance below -65C, high tear and tensile strength, high refractive index. Features & ...
DOWSIL™ 3-6371 UV Gel One-part, translucent amber, UV cure with moisture secondary cure (for shadow areas). Features & Benefits 1-part UV cure with moisture ...
DOWSIL™ 3-6635 Dielectric Gel One-part, heat cure, with low temperature (-80°C/-112°F) stability Features & Benefits 1-part gel with no mixing required ...
DOWSIL™ 3-8264 Encapsulant Kit Two-part, black, 1:1, heat cure, low viscosity, self-priming at moderate temperatures. Features & Benefits 1:1 mix ratio ...
DOWSIL™ 93-500 Space Grade Encapsulant Kit Transparent space grade encapsulant Features & Benefits 10:1 mix ratio Flowable Low levels of volatile ...
DOWSIL™ 93-500 Thixotropic Kit Two-part, 10:1 mix, translucent-white space gradeencapsulant. Features & Benefits 10:1 mix ratio Thixotropic Very low levels of volatile ...
DOWSIL™ CN-8760 Thermally Conductive Encapsulant Two-part, 1 to 1, room temperature and heat curable to give manufacturing flexibility, gray elastomer with moderate thermal ...
DOWSIL™ EE-1010 Low Viscosity Encapsulant Kit Suitable for use in applications where there are frequent start/stops during the manufacturing process or where board and component ...
DOWSIL™ EE-1840 A&B Kit Two part, 1:1 mix ratio black encapsulant Features & Benefits RTV (room temperature vulcanization) or heat cure No exotherm ...
DOWSIL™ EE-3200 Low Stress Silicone Encapsulant Two-part, 1 to 1 mix ratio, low viscosity encapsulant Features & Benefits Soft, low durometer Low viscosity Room temperature ...
DOWSIL™ EG-3000 Thixotropic Gel Parts A&B Two-part, heat cure, thixotropic gel. Features & Benefits Heat cure gel Thixotropic to allow selective and ...
DOWSIL™ EG-3810 Dielectric Gel One-part, low/high temperature gel DOWSIL™ EG-3810 Gel delivers long-lasting performance as a protective potting material for power ...
DOWSIL™ EG-3896 Kit Suitable for potting and protecting of electronics devices, especially power semiconductor modules to protect dies and interconnects from environmental conditions ...
DOWSIL™ EI-1184 Optical Encapsulant A 1:1 mix ratio, fast curing, 2-part silicone encapsulant suitable for encapsulating rigid and flexible circuit boards indoor and outdoor LED Lighting ...
DOWSIL™ Q3-6575 Dielectric Gel A/B Kit Two-part, clear, RT or heat cure and low temperature (-80°C/-112°F)stability. Features & Benefits Fast heat cure ...
DOWSIL™ SE 1816 CV Kit Two-part, 1 to 1 mix, black encapsulant with good flame resistance and moderate thermal conductivity Application DOWSIL™ SE 1816 CV Kit is suitable ...
DOWSIL™ X3-6211 Encapsulant One-part, clear, UV cure. Features & Benefits One-part UV cure gel with no mixing required Suitable for very low ...
Electrolube ER 1122 je večnamenska, dvo-komponentna epoksidna zalivna masa z odlično adhezijo na površine, ki se lahko utrjuje pri sobni ali povišani temperaturi. Polimerizirana masa je zelo ...
Electrolube ER 1426 je brezbarvna, dvo-komponentna, epoksidna zalivna masa z zelo nizko viskoznostjo. Zaradi nizke viskoznosti in dolgega odprtega časa je posebej primerna za impregnacijo in ...
Electrolube ER 1450 in ER 1451 sta hitrosušeči, nizkoviskozni in žilavi epoksidni zalivni masi z dobrim oprijemom na številne materiale. Karakteristike: Visoka odpornost na vodo Odličen ...
ER2001 is a flame retardant, general purpose, two part potting and encapsulating compound. The flame retardant technology used is of a ‘clean’ type leading to relatively low toxicity fumes and ...
Electrolube ER2074 je toplotno prevodna, negorljiva dvo-komponentna epoksidna smola. Namenjena je zalivanju tiskanih vezij ali komponent, zaradi dobre toplotne prevodnosti pa skrbi za zanesljiv ...
ER2136 is a slightly thixotropic hot cure one-part epoxy system designed specifically for use as a dipping resin for hybrid circuits and discrete components. The standard colour is blue but other ...
ER2162 is a two-part flame retardant epoxy with excellent solvent resistance.The rigid and inert nature of this encapsulant lends itself ideally to the protection of electrical/electronic units ...
Electrolube ER2183 je toplotno prevodna, negorljiva dvo-komponentna epoksidna smola. Namenjena je zalivanju tiskanih vezij ali komponent, zaradi dobre toplotne prevodnosti pa skrbi za zanesljiv ...
Electrolube ER 2188 je negorljiva, toplotno prevodna, večnamenska, dvo-komponentna epoksidna zalivna masa. Trdilec ne vsebuje DDM-ja in drugih aromatičnih aminov. Sistem za zagotavljanje ...
ER2195 is a flame retardant, general purpose, two part potting and encapsulating compound. The cured product exhibits a high degree of toughness and adhesion and is particularly suited to ...
Electrolube ER 2218 je nizkoviskozna, negorljiva, dvo-komponentna epoksidna zalivna masa. Zaradi visoke temperaturne obstojnosti je primerna tudi za reflow aplikacije. Karakteristike ...
Electrolube ER 2220 je negorljiva, toplotno prevodna, dvo-komponentna epoksidna zalivna masa. Z dobro toplotno prevodnostjo zagotavlja učinkovit odvod odvečne toplote od občutljivih delov in ...
High Temperature Resin ER2223 black epoxy resin has been specially formulated to meet the harsh operating conditions of under-hood applications in the automotive industry. It has excellent ...
Electrolube ER 2225 is a black epoxy potting compound formulated to meet the exacting requirements of the automotive industry, although will find application in a wide range of industries where high ...
ER4001 is a thermally conductive epoxy resin system which is highly temperature resistant, providing full protection up to 150°C. Thanks to its enhanced thermal conductivity; ER4001 is ideal for ...
Electrolube OP 9020 je posebno topilo namenjeno odstranjevanju nepolimeriziranih epoksidnih in poliuretanskih smol z delov strojev in delovnih površin. Ker ne vsebuje halogenov je manj ...
Electrolube RRS je posebna zmes topil namenjena nabrekanju in mehčanju ali celo raztapljanju polimeriziranih lakov ter epoksidnih in poliuretanskih smol ter posledičnemu enostavnejšemu ...
Resin Stop je zasnovan na tehnologiji floro-polimerov in je namenjen zagotavljanju preprečitve oprijema epoksidnih in poliuretanskih smol na površine zaščitene z Resin Stopom. Posebej ...
Electrolube SC3001 je optično čista, elastična, dvo-komponentna silikonska zalivna masa. Posebej primerna je za zaščito LED diod, LED trakov ter drugih komponent in sestavov, kjer je ...
UR5041 je visokozmogljiva zalivna masa, z odlično odpornostjo na morsko vodo ter nizko vpojnostjo vode. Lastnosti: izredno dobre lastnosti osnovane na polibutadienski tehnologiji ...
UR5044 je visokozmogljiva, ognje odporna zalivna masa.Nudi odlično zaščito občutljivim elektronskim tiskanim vezjem in komponentam tudi v ekstremnih in spremenljivih pogojih. Lastnosti: ...
UR5048 je prosojna, trajnoelastična zalivna masa, ki jo je mogoče enostavno odstraniti, v kolikor je to potrebno za namen popravila/zamenjave pokvarjenih komponent. Ker je prosojna je mogoče ...
UR5083 je visokozmogljiva, zalivna masa z edinstveno sposobnostjo samocelenja po penetraciji. V primeru odstranitve konektorja, komponente ali žice, se nastala odprtina hitro zapolni ter tako ...
Electrolube UR5097 je toplotno prevodna, negorljiva, dvo-komponentna poliuretanska zalivna masa. Namenjena je zalivanju tiskanih vezij ali komponent, zaradi dobre toplotne prevodnosti pa skrbi ...
Electrolube UR5528 je dvo-komponentna poliuretanska zalivna masa z odlično odpornostjo na vodo. Zaradi tega je zelo primerna za najrazličnejše aplikacije kjer obstaja nevarnost vdora vode ali ...
Electrolube UR5547 je poltrda, negorljiva, dvo-komponentna poliuretanska smola. Posebej primerna je za zaščito majhnih občutljivih komponent saj tudi pri temperaturnem cikliranju ne ...
Electrolube UR5598 je transparentna, poltrda, trpežna, dvo-komponentna poliuretanska zalivna masa. Nizka viskoznost omogoča zalivanje kompleksnih sestavov brez neželenih zračnih žepov in ...
Electrolube UR5604 je večnamenska, visokozmogljiva, dvo-komponentna poliuretanska zalivna masa. Namenjena je zalivanju in zaščiti najrazličnejših električnih in elektronskih komponent in ...
Electrolube UR5608 je visokozmogljiva, negorljiva, dvo-komponentna poliuretanska smola. Namenjena je zalivanju tiskanih vezij ali komponent, posebej primerna je za aplikacije, ki so podvržene ...
Electrolube UR5618 je visokozmogljiva, negorljiva, dvo-komponentna poliuretanska smola. Namenjena je zalivanju tiskanih vezij ali komponent, posebej primerna je za aplikacije, ki so podvržene ...
Electrolube UR5623 je visokozmogljiva, negorljiva, dvo-komponentna poliuretanska smola. Namenjena je zalivanju tiskanih vezij ali komponent, posebej primerna je za aplikacije, ki so podvržene ...
Electrolube UR 5634 je dvo-komponentna, poltrda, optično čista, poliuretanska zalivna masa. Posebej primerna je za uporabo kot dekorativna in zaščtina zalivka kjer se zahteva nizka ...
Electrolube UR 5635 je dvo-komponentna, poltrda, poliuretanska zalivna masa mlečnega izgleda. Posebej primerna je za uporabo kot dekorativna in zaščtina zalivka kjer se zahteva disperzija ...
Electrolube UR5638 is an optically clear / transparent polyurethane resin consisting of an aliphatic polymer designed to provide excellent UV stability while at the same time excellent transmission ...
Electrolube UR 5640 is a two-part, semi-rigid optically clear polyurethane resin ideal for use in protective applications. Due to a carefully selected blend of components an extremely durable, low ...
UR7002 is a two-part potting and encapsulation compound formulated for high performance. It exhibits a high degree of flexibility, ideal for encapsulating delicate electronics or components which it ...
FLUOROGEL™ 4-8022 One-part, translucent, heat cure, UV indicator, fuel and solvent resistant. Features & Benefits 1-part heat curing gel with no mixing ...
FLUOROGEL™ Q3-6679 Dielectric Gel Kit Two-part, clear, RT or heat cure, solvent and fuel resistant. Features & Benefits Room temperature or heat cure Long ...
SYLGARD 170 poznan tudi kot Dow Corning SYLGARD 170 Silikonski Elastomer je črna, dvo-komponentna, večnamenska zalivna masa z mešalnim razmerjem 1:1, dobrim tečenjem in dolgim odprtim časom. ...
SYLGARD 184 also known as Dow Corning Sylgard 184 is a transparent silicone based encapsulant with good flame resistance. It is especially suitable for encapsulation of LED Lighting ...
SYLGARD 567 poznan tudi kot Dow Corning Sylgard 567 je dvo-komponentna, črna zalivna masa z mešalnim razmerjem 1:1, dolgim odprtim časom ter UL in MIL specifikacijo, ki mreži pri povišanih ...
SYLGARD™ 160 Silicone Elastomer Kit Two-part, 1 to 1 mix, dark gray, general purpose encapsulant with good flowability and flame resistance. Applications SYLGARD™160 Silicone ...
SYLGARD™ 164 Silicone Elastomer Kit Two-part, grey, 1:1, fast RT cure, general purpose, moderate thermal conductivity, UL. Applications SYLGARD™ 164 Silicone ...
SYLGARD™ 170 Fast Cure Silicone Elastomer Kit Two-part, black, 1:1, fast RT curing, low viscosity, general purpose, UL. Features & Benefits Low viscosity ...
SYLGARD™ 182 Silicone Elastomer Kit Two-part, clear, 10:1, heat cure, good strength, UL and Mil Spec, same as SYLGARD® 184 but with longer working time. Features & ...
SYLGARD™ 186 Silicone Elastomer Kit Two-part, translucent, 10:1, RT or heat cure, high tear strength, UL. Features & Benefits 10:1 mix ratio High viscosity ...
SYLGARD™ 3-6636 Silicone Dielectric Gel Kit Two-part, transparent, LED encapsulant. Features & Benefits Clear, fast heat curing gel High viscosity to limit flow ...
SYLGARD™ 527 A&B Silicone Dielectric Gel A two-part, 1 to 1 mix ratio dielectric gel that is suitable for sealing and protecting various electronic devices, especially those with delicate ...
SYLGARD™ 528 Firm Gel Parts A&B Two-part, clear, heat cure, firm gel. Features & Benefits Heat cure Long working time and low viscosity aid process ...
SYLGARD™ 535 Thixotropic Dielectric Gel One-part, clear, heat cure, thixotropic gel. Features & Benefits 1-part heat cure gel with no mixing required ...
SYLGARD™ 537 One Part Dielectric Gel One-part, clear, heat cure, low viscosity gel. Features & Benefits One-part gel with no mixing required Low ...